Mounty Head - MR

The Mounty Head -MR attachment is designed to lift CP800 Corner Protectors to height to assist with the safe loading of your vehicle.

The Mounty Head- MR is designed specifically to accommodate the CP800 Corner Protector (Product code LMG804) which provides 800mm of protection for soft, uneven or abrasive top edges of pallets and allows single or multiple lashing.

The Mounty Head - MR is used in conjunction with the Mounty Pole (product code LMG801) to place CP800 edge protectors onto vehicles from the ground without the need to clamber onto vehicles, working platforms or ladders. It therefore removes the risk of falling from heights and reduces the risk of slips or trips.

In addition to placing CP800’s onto pallets and loads at height, the Mounty Head - MR features a triangular hole in the back plate useful for pulling down hooks that are out of reach. As with the regular Mounty Head, Mounty Head - MR has a special webbing placement cut out at the top to assist an operator place 50mm webbing accurately both onto the guide saddles moulded into corner protectors and to untangle straps.

Mounty Head -MR is made from tough Nylon 6 material so it will not shatter should it fall from height.

With such features as DVSA compliancy, meeting working at height legislation, speedier loading securement and at a fraction of the cost of loading platforms or ladders, it also saves lives and reduces injury exposure to the workforce and general public. These benefits mean lower chances of 3rd party claims for personal injury and goods or vehicle damage.

NOTE: If using smaller edge protectors please use the Mounty Head (product code LMG802)

For information about other Mounty Adaptor Products please call us on 01543 897 505